0729-1736-99 ±35° Programmable Dual-Axis Tilt Switch

0729-1736-99 Relay Tilt Switch
Datenblatt herunterladen

Part Number: 0729-1736-99

Merkmale und Vorteile:

  • ±35° programmierbare Auslösepunkte
  • Dual/two-axis measurement tilt switch
  • 1 einfach zu bedienender Relaisausgang
  • Ansprechzeit von ≤100 ms
  • Großer Spannungsversorgungsbereich von 7 V DC bis 30 V DC
  • Works with industry-standard 12 and 24 V DC vehicle batteries
  • Schwachstromgerät mit einer Stromaufnahme von 30 mA bei 12 V DC; geringe Leistungsaufnahme
  • Fliegende Kabel mit kundenspezifischen Steckern für einfache Integration erhältlich
  • Überlegene Leistung bei extremen Temperaturen und Umgebungen
  • Ausgezeichnete Kundenbetreuung

Our tilt switches (also referred to as a safety switch or tilt switch sensor module) are very similar to our inclinometers, but instead of a continuous output, tilt switches have a discrete on/off output from either a relay or an open collector. This tilt switch has 1 relay output (omnidirectional) which can be set to trip at specific angles in two axes, up to ±35° tilt. This tilt switch comes in a plastic housing, environmentally sealed and rated IP66, with a flying leads cable that can be customized with almost any connector you specify. The trip angle can be set by us at the factory or set and reset by you in the field via the RS-232 communications.

The nature of the relay output makes this unit ideal for various tilt switch applications like construction vehicles and agricultural vehicles. More specific tilt switch applications include boom lifts, scissor lifts, and agricultural sprayers.

Wenn Sie mehr über die Prinzipien der Neigungserkennung und die Integration von Neigungsschaltersensormodulen in Ihre Anwendung erfahren möchten, besuchen Sie unsere Seite mit technischen Informationen.

Purchase

Beschreibung des Produkts
Preis
Menge
±35° Programmable Dual-Axis Tilt Switch
±35° Programmable Dual-Axis Tilt Switch
PN: 0729-1736-99
$154.80

Spezifikationen

Ausgang 1 relay
Versorgungsspannung 7 V DC to 30 V DC
Versorgungsstrom 30 mA @ 12 V DC
Betriebsbereich ±35º
Minimaler Auslösewinkel ±1º
Achsen der Messung 2
Null-Offset ≤5°
Reproduzierbarkeit ±0.1°
Trip Accuracy ±0.2°
Output Trip Delay (default, settable) 1 s
Output Return Delay (default, settable) 0.5 s
Output Hysteresis (default, settable) 0.25°
Output Filter (default, settable) 0 s
Cross-Axis Sensitivity ≤0,025° pro Grad
Long Term Stability/Drift ≤0.1°
Materialien Contains magnetic metals
Betriebstemperatur -35 °C to 70 °C
Lagertemperatur -35 °C to 70 °C
Gehäuse ABS-Kunststoff
Elektrische Anschlüsse 18" cable with 24-gauge wire
Gewicht 150 g
Länge 53 mm (2.102”)
Breite 79 mm (3.117”)
Höhe 27 mm (1.075”)
Flansch Länge 24 mm (0.936”)
Bohrung Mitte 89 mm (3.500”)
Loch-Durchmesser 5 mm (0.188”)
0729-1763-XX Dimensional Drawing
Red Supply (7 V DC to 30 V DC)
Black Supply (-)
Orange Zero wire
Green Relay (C)
Violet Relay (NO)
Blue Relay (NC)
Brown RS-232 receive (RX)
Yellow RS-232 transmit (TX)
width="250"

RS-232 Settings

Baud Rate 9600
Data Bits 8
Parity Keine
Stop Bits 1

RS-232 Commands

‘?’ Show a list of all commands
‘set’ Enter setup mode
‘x’ Change x axis trip angle
‘y’ Change y axis trip angle
‘+’ Increment selected axis trip angle by 0.1°
‘-’ Decrement selected axis trip angle by 0.1°
‘S’ Save selected trip angles
‘Z’ Set and save a new zero position
‘d’ Change and save trip delay (0 to 9)
‘r’ Change and save return delay (0 to 9)
‘p’ Change and save relay polarity (0 to 9)
‘h’ Change and save hysteresis value (1 to 8)
‘f’ Change and save filter value (0 to 9)
‘q’ Show all settings
Esc Cancel the current command
RoHS-konform
IP66 Environmental Protection

0729-1736-99 Quantity Discounts

Menge Preis
1 $154.80
10 $140.14
100 $130.43
500 $126.31
1000+ $114.18