1-6200-012 Analog/RS-232-Signalkonditionierer - Elektrolytische Neigungssensor-Schaltung

Part Number: 1-6200-012


Compatible With: 0703-1602-99, 0703-1603-99, 0703-0711-99


Merkmale und Vorteile:

  • Kleiner elektronischer Neigungssensor
  • 0 to 5 V DC analog outputs and RS-232 communications for simple integration
  • Befestigungslöcher und Anschlüsse für einfache Integration
  • 16-Bit-ADCs und -DACs für höchste Genauigkeit
  • 0703 series sensors can be mounted directly on the board

All Fredericks electrolytic tilt sensors require a basic electrolytic tilt sensor circuit to generate a tilt angle output. These are often called signal conditioners, signal conditioning boards, or electronic tilt sensors. Fredericks’ single/one axis 0703 series tilt sensors can be mounted directly on this board for a complete inclinometer solution. The sensors are mounted orthogonally (at a 90° angle), making it a dual/two-axis solution. The 16-bit ADC input and 16-bit DAC output resolution allow this signal conditioner to provide exceptional accuracy in a variety of applications.

This electrolytic tilt sensor circuit has 0 to 5 V DC analog outputs and RS-232 communications and mounting holes, making it simple to integrate into your own design. If you’d like to integrate the electrolytic tilt sensor circuit PCB into your own circuit design, The Fredericks Company can offer bills of material, Gerber files, and firmware source files along with engineering support for the integration. We have electrical/hardware, firmware, and mechanical design engineers on staff to assist with this process.

Beschreibung des Produkts
Preis
Menge
Analog/RS-232 Signal Conditioning Board
Analog/RS-232 Signal Conditioning Board
PN: 1-6200-012
$233.71
Kommunikation RS-232
Analoger Ausgang 0 V DC to 5 V DC
Analog Input Resolution 16 Bits
Auflösung des Analogausgangs 16 Bits
Betriebsbereich 0% bis 100% des Sensorbereichs
Versorgungsspannung 7 V DC bis 16 V DC
Versorgungsstrom 20 mA @ 7 V DC
Betriebstemperatur -40 °C bis 85 °C
Lagertemperatur -40 °C bis 125 °C
Sensors Controlled 1 oder 2
Achsen der Messung 1 oder 2
Bereich des Temperatursensors -40 °C bis 125 °C
Gehäuse Keine
Elektrische Anschlüsse 8 Pin, 0.1" spacing
Gewicht 20 g
Länge 45 mm (1.77")
Breite 45 mm (1.77")
Höhe 12 mm (0.46”)
1-6200-012 Dimensional Drawing
J1 Pin 1 RS-232 ground
J1 Pin 2 Analog output ground
J1 Pin 3 Supply voltage (+)
J1 Pin 4 Supply voltage (-)
J1 Pin 5 RS-232 receive (in)
J1 Pin 6 X axis analog out
J1 Pin 7 Y axis analog out
J1 Pin 8 RS-232 transmit (out)
L1 and L2 Single Axis sensor connections
width="250"

RS-232 Information

Baud Rate 9600 (default, selectable up to 115200)
Data Bits 8
Parity Keine
Stop Bits 1

RS-232 Commands

‘x’ or ‘X’ X axis output (0 to 65535)
‘y’ or ‘Y’ Y axis output (0 to 65535)
‘t’ or ‘T’ Temperature output (0 to 1023)
‘s’ or ‘S’ Output X, Y, temperature at set intervals
‘r’ or ‘R’ Stop timed interval output
‘1’ to ‘5’ Set delay (in seconds) for set intervals
‘v’ or ‘V’ Product information and version
‘B1’ to ‘B5’ Set baud rate to: ‘B1’ – 9600
‘B2’ – 19200
‘B3’ – 38400
‘B4’ – 57600
‘B5’ – 115200
‘?’ List all commands
None (PCB sub-assembly)
Menge Preis
1 $233.71
10 $221.96
100 $196.32
500 $182.64
1000+ $174.06