Part Number: 2-7900-037
Compatible With: 1E Piezo Diaphragm, 1F Piezo Diaphragm, 2A Thermocouple, 2A VacuMini, 2A NASA Mini, 4A Convection, 7B Cold Cathode, 7E Cold Cathode, 7F Cold Cathode, 7FC Cold Cathode, 7FCS Cold Cathode, CDG, Set Point Relays
Features and Benefits:
- Rack mountable with a highly configurable design
- USB included in every unit for simple connection with a PC
- High contrast OLED display with 180° viewing angle
- Selectable units of measurement (Torr, mbar, Pascal)
- Bootloader for field upgradeable firmware
- Gas conversion functions included for nitrogen/air, argon, hydrogen, helium, neon, krypton, and carbon dioxide
- Analog outputs (0 to 10 V DC) for every connected passive vacuum gauge
- User-configurable analog output ranges
- Excellent customer support
- NIST traceable calibration optional
- DHCP enable or disable with programmable IP address
- Status LEDs for network/module status/port data activity
- 10/100 Mbit, half or full duplex port operation
- Secure web access for network and unit data and settings
The Televac® MX200 EthernetIP vacuum controller (also called a vacuum control unit or vacuum pressure controller) can be connected to up to 10 Televac® passive vacuum gauges including cold cathode gauges, convection gauges, diaphragm gauges, and thermocouple vacuum gauges. It also includes 0 to 10 V DC analog outputs for each vacuum gauge connected to the vacuum controller, EthernetIP/USB digital communications for simple integration with a PC or PLC, and up to 8 optional set point relays to act as a vacuum pressure controller for process control in your vacuum system.
The MX200 vacuum controller’s user interface includes six touch controls and a high contrast, 180° viewing angle OLED display, which shows measurements from up to 8 connected vacuum gauges simultaneously along with the selected units of measurement and the status of set point relays. This vacuum control unit supports multiple gas types including nitrogen/air, argon, hydrogen, helium, neon, krypton, and carbon dioxide. The MX200 vacuum controller is a modular unit, allowing you to choose a vacuum sensing solution specific to your needs.
Looking for a smaller, scaled down version of this vacuum controller? Check out the MC300. Need a vacuum controller with an analog display? Check out the Compact 2A.
Operating Range (Torr) | 1*10-11 to 10,000 Torr max |
Communications (-034) | USB/RS-232/RS-485 |
Communications (037) | USB/EthernetIP |
Analog Output | 0 to 10 VDC (1 per sensor) |
Analog Output Resolution | 16 Bits |
Programmable Set Points | 4 per module (8 max) |
Set Point Type | Relay |
Supply Voltage | 115/230 VAC (2/1 A), 50-60Hz |
Maximum Power | 230 W |
Calibration Medium | Dry air or nitrogen |
Operating Temperature | 0 °C to 50 °C |
Storage Temperature | -20 °C to 70 °C |
Display Readable Distance | 5 m (16 ft) |
Maximum Sensors Controlled | 10 |
Maximum Sensors Displayed | 8 |
Response Time | ≤ 10 ms |
Instrument | Part Number | |
MX200 Base Unit USB/EthernetIP | 2-7900-037 | |
MX200 Base Unit USB/RS-232/RS-485 | 2-7900-034 | |
Module | Part Number | Slot (max) |
Set Point Quad Relay | 2-6200-411 | 1 (2) |
1E Dual Piezo Diaphragm | 2-6200-220 | 1 (5) |
1F Dual Piezo Diaphragm | 2-6200-244 | 1 (5) |
2A Dual Thermocouple | 2-6200-486 | 1 (5) |
4A Dual Convection | 2-6200-215 | 1 (5) |
7B Penning Magnetron Cold Cathode | 2-6200-227 | 2 (3) |
7EF DI Magnetron Cold Cathode | 2-6200-285 | 1 (5) |
Capacitance Diaphragm | 2-6200-252 | 1 (5) |
Heat treating and vacuum furnaces | |
National laboratories, universities, research and development | |
Cryogenics and industrial gases | |
Thin film deposition and coating processes | |
Semiconductor | |
Vacuum Distillation | |
Freeze drying and food packaging | |
Load-lock | |
Leak detection | |
Pharmaceutical product processes |

CompactLogix™ is a registered trademark of Rockwell Automation, Inc. All other trademarks are the property of their respective owners.