Bayard-Alpert Ion Gauge - Hot Cathode

Part Numbers: 3301-8305-012 3301-8305-02, 3301-8305-051, 3301-8306-02, 3302-8305-012, 3302-8305-02, 3302-8305-051, 3302-8305-212, 3302-8305-251, 3303-8305-451

Kompatible Vakuum-Controller:

  • MKS Granville Phillips Modelle 260, 270, 280, 303, 306, 307, 330, 340, 350
  • MKS-Instrumente 290, 919, 929
  • Perkin Elmer DGC3
  • Varian 831, 836, 842, 844, 845, 880, 971-0003, 971-0014, 971-1008, Multi-Gauge
  • Veeco RG2, RG3, RG21, RG31, RG81, RG83, RG84, RG830, RG840, RG1000, RG1002

Merkmale und Vorteile:

  • Kostengünstiges Vakuummeter
  • Degassing and dual filaments for extended vacuum gauge lifetime
  • Replacement filament assemblies (RFA) for extended life
  • Accurate and reliable hot cathode technology
  • Contamination resistant vacuum transducer
  • Exzellenter Kundensupport für Vakuum-Messumformer

The ETI series of Bayard-Alpert ion gauges (also called a vacuum gauge, vacuum transducer, BA gauge, hot ion, or hot cathode) feature burnout-resistant yttria or coated iridium filaments or two tungsten filaments for vacuum measurement. This vacuum gauge has a wide measurement range of 10-10 to 10-3 Torr and can be outgassed for extended life of the vacuum gauge and cleaning of hot cathode contamination. The dual filament vacuum gauge design allows you to use the second filament when the first filament burns out or becomes heavily contaminated in this vacuum transducer. Filaments can also be replaced with our replacement filament assemblies (RFA), which can be found at the bottom of this page.

Suchen Sie nach einer reinigbaren, länger haltbaren Lösung? Dann empfehlen wir Ihnen unsere Kaltkathodentechnologie, wie z. B. das Kaltkathoden-Vakuummeter 7FCS. Dies ist eine andere Vakuummeter-Technologie für Ionenmanometer Druckmessung die einen Kaltkathoden-Vakuumwandler (anstelle einer Heißkathode) verwendet, der weniger anfällig für Verunreinigungen ist und sich leichter reinigen lässt, wenn das Vakuummeter doch einmal verschmutzt ist.

Bayard-Alpert Ion Gauges

Blättern Sie nach rechts, um weitere Informationen in der Tabelle unten anzuzeigen.

PreisKaufenPN TFCPn gp mksFilamentBeschichtungFlanschPin-Konfiguration
$539.00
3302-8305-0122740222 WolframKeineCF405 Stift
$537.00
3302-8305-02Keine2 WolframKeineCF406 Stift
$560.00
3302-8305-0512740412 WolframKeineCF405 Stift
$523.00
3302-8305-2122740502 WolframKeineKF405 Stift
$547.00
3302-8305-2512740572 WolframKeineKF405 Stift
$551.003303-8305-4512740431 IridiumCoatedCF406 Stift
$560.003301-8305-0122740232 IridiumCoatedCF405 Stift
$558.003301-8305-02Keine2 IridiumCoatedCF406 Stift
$583.003301-8305-0512740422 IridiumCoatedCF405 Stift
$509.003301-8306-02Keine2 IridiumCoatedNo Flange (1.5" Header)6 Stift

Replacement Filament Assemblies (RFA)

Blättern Sie nach rechts, um weitere Informationen in der Tabelle unten anzuzeigen.

PreisKaufenPN TFCPn gp mksFilamentBeschichtungFlanschPin-Konfiguration
$77.00
5-8325-022740242 WolframKeineKeineKeine
$165.005-8325-012740252 IridiumCoatedKeineKeine
$110.005-8325-032740291 IridiumCoatedKeineKeine

6 Pin Dual Filament Configuration

Pinout diagram for the 8140 Dual Tungsten Bayard-Alpert Vacuum Gauge.
Pin 1 Raster
Pin 2 Raster
Pin 3 Kollektor
Pin 4 Filament #1
Pin 5 Gemeinsame
Pin 6 Filament #2

6 Pin Single Filament Configuration

Pinout diagram for the 8140 Single Iridium Bayard-Alpert Vacuum Gauge.
Pin 1 Raster
Pin 2 Raster
Pin 3 Kollektor
Pin 4 Filament
Pin 5 Filament
Pin 6 Not Used

5 Pin Configuration

Pinout diagram for the 8130 Bayard-Alpert Vacuum Gauge.
Pin 1 Raster
Pin 2 Kollektor
Pin 3 Filament #1
Pin 4 Gemeinsame
Pin 5 Filament #2
Verbindung 2-3/4", 1" conflat oder KF 40 Flansch
Umschlag Keine
Einbaulage Vertikal
Kollektor .005" Wolfram
Filament Replaceable coated iridium or dual tungsten (8130)
Raster Ta- und Pt/Mo-Träger-Kurzschlusskäfig
Empfindlichkeit für N2 25/Torr
Röntgengrenze 2*10-10 Torr
Betriebsdruck 2*10-11 bis 1*10-3 Torr
Elektronenbombardierung Degas 40 W @ 500 V
Widerstandsbeheizter Degas k.A.
Ausheiztemperatur 450 °C