AN 1003: Configurar el término Tera para su uso con los productos TFC Tilt

Descripción

Este documento explica el proceso de configuración de Tera Term para las comunicaciones con los productos TFC tilt desde un PC con Windows 7. El programa de comunicaciones en serie Tera Term debe ser instalado antes de seguir estas instrucciones, y se debe comprar un convertidor de serie a USB.

Instrucciones

1. Plug the serial to USB converter into your PC.

2. Abra el menú Inicio.

3. Abra el Panel de control.

4. Abra Hardware y Sonido.

5. Abra el Administrador de dispositivos.

6. Despliegue el menú desplegable Puertos (COM y LPT).

7. Determine the COM port assignment for your USB to serial converter, in this example the converter is assigned to COM3.

8. Open TeraTerm.Abra el menú de configuración y seleccione la opción Puerto serie....

9. Change the Port setting to the COM port for your USB to serial converter, in this example it is COM3.

10. Ensure that the remainder of the settings are the following, then select OK:

  1. Tasa de baudios: 9600
  2. Data: 8 bits
  3. Paridad: ninguna
  4. Parada: 1 bit
  5. Control de flujo: ninguno
  6. Retraso de transmisión: 0 mseg/car, 0 mseg/línea

11. Open the Setup menu and select the Terminal setup… option.

12. Ensure that the settings are the following, then select OK:

  1. Recibir: CR+LF
  2. Transmite: CR+LF
  3. Comprobado el eco local

13. You can now send the desired commands to the unit.