This electrolytic tilt sensor (also sometimes called an electronic tilt sensor) gives narrow range measurement up to ±0.5° with extremely high accuracy of ±0.0003° in one axis (single-axis measurement). It’s an encapsulated version of the 0737-1203-99 for simpler mounting and connections. You’ll need two sensors to read in two axes (with orthogonal mounting, or mounted at a 90° angle) because it’s a one-axis sensor. It’s a glass, hermetically sealed sensor for use in less extreme environments than our similar Fredericks all-metal sensors. This sensor is the highest accuracy sensor we offer, but it’s also higher cost than similar 0717 and 0703 series sensors.
All of our electrolytic sensors require an electrolytic tilt sensor circuit (also commonly referred to as signal conditioning or a signal conditioner) to provide a tilt angle output. This can be built into your system or you can purchase an electrolytic tilt sensor circuit we’ve designed. Our circuits are optimized for the best performance from our electronic tilt sensors.
To learn more about the principles of electrolytic sensors and how to integrate our sensors into your application, see our Technical Information page. Confused about terminology? The following terms are often used interchangeably, though they have slightly different meanings; tilt sensor, electrolytic tilt sensor, and electronic tilt sensor.
|Especificaciones de funcionamiento|
|Rango de operación||±0.5°|
|Número de hachas||1|
|Temperatura de funcionamiento||-20 °C a 50 °C|
|Temperatura de almacenamiento||-55 °C a 125 °C|
|Constante de tiempo||≤500 ms|
|Longitud||41 mm (1,63")|
|Anchura||13 mm (0,5")|
|Altura||16 mm (0,625")|
|Diámetro del poste||2 mm (0,086")|
|Altura del puesto||9 mm (0,37")|
|Longitud del plomo||381 mm (14,0")|
|Calibre del cable||30 AWG|