Building Your Next MX200 Just Got Easier

Customizing the Televac® MX200 Vacuum Controller to your exact specifications can be time consuming and confusing if you’re designing a new system or retrofitting an old one. There are a lot of parts that need to be ordered; from the modules, sensors, types of calibration, and cables. Rather than making multiple phone calls or sending back and forth emails to our sales department. We want to make the process of building your next Televac® MX200 Vacuum Controller faster and more convenient.

That’s why today, The Fredericks Company has released the MX200 Configurator Tool. The Configurator Tool is an all-in-one solution for building your next Televac® MX200 Vacuum Controller to your exact specifications, online and on your schedule. The configurator tool is designed to walk you through the process of selecting low vacuum sensors like the 2A Thermocouple and 4A Convection vacuum gauges to high vacuum sensors like the 7B Penning Magnetron Cold Cathode vacuum gauge.

For each sensor selection, you have the option of choosing the type of flange, type of calibration, and cable length that you need. That’s not all the configurator does, it also allows you to select different communication modules between the RS-232/RS-485 and the EthernetIP module, up to two relay modules, and capacitance diaphragm gauge (CDG) modules.

After you send your request, you will receive a unique number that you can use to access your configured Televac® MX200 anytime to reorder another MX200 Vacuum Controller.

If you would like to see how the Televac® MX200 Configurator Tool works, watch the demonstration video by clicking the link here or if you would like to order your next MX200 Vacuum Controller today online, you can start by clicking the link here.

Return to Blog