This electrolytic tilt sensor (also sometimes called an electronic tilt sensor) gives narrow range measurement up to ±1° with an extremely high accuracy of ±0.0008° in one axis (single-axis measurement). This means that you’ll need two sensors to read in two axes (with orthogonal mounting, or mounted at a 90° angle). It’s a glass, hermetically sealed sensor for use in less extreme environments than our similar Fredericks all-metal tilt sensors. This sensor is the highest accuracy sensor we offer, but it’s also higher cost than similar 0717 and 0703 series tilt sensors.
All of our electrolytic sensors require an electrolytic tilt sensor circuit (also commonly referred to as signal conditioning or a signal conditioner) to provide a tilt angle output. This can be built into your system or you can purchase an electrolytic tilt sensor circuit we’ve designed. Our circuits are optimized for the best performance from our electronic tilt sensors.
To learn more about the principles of electrolytic sensors and how to integrate our sensors into your application, see our Technical Information page. Confused about terminology? The following terms are often used interchangeably, though they have slightly different meanings; tilt sensor, electrolytic tilt sensor, and electronic tilt sensor.
|Spécifications de fonctionnement|
|Gamme de fonctionnement||±1°|
|Température de fonctionnement||-20 °C à 50 °C|
|Température de stockage||-55 °C à 125 °C|
|Constante de temps||≤500 ms|
|Longueur||32 mm (1,25")|
|Diamètre||7,1 mm (0,281")|
|Longueur du fil||3,2 mm (0,125")|