0729-1757-99 ±45° Programmable Single-Axis Tilt Switch

Part Number: 0729-1757-99


Caractéristiques et avantages :

  • Points de déclenchement programmables à ±45°.
  • Commutateur d'inclinaison de mesure à un/un seul axe
  • 2 sorties à collecteur ouvert simples à utiliser
  • Temps de réponse de ≤100 ms
  • Large gamme de tension d'alimentation de 4,5 V DC à 28 V DC
  • Fonctionne avec des batteries de véhicules 12 et 24 V DC standard
  • Dispositif à faible courant tirant 3mA à 4,5V et 28V ; faible consommation d'énergie
  • Câble à fils volants avec connecteurs personnalisés disponibles pour une intégration simple
  • Des performances supérieures dans des températures et des environnements extrêmes
  • Un excellent service à la clientèle

Our tilt switches (also referred to as a safety switch or tilt switch sensor module) are very similar to our inclinometers, but instead of a continuous output, tilt switches have a discrete on/off output from either a relay or an open collector. This tilt switch has 2 open collector outputs which can be set to trip at specific angles on one axis, up to ±45° tilt. This tilt switch comes in a plastic housing, IP50 environmental protection (epoxy potting is available upon request for IP66 protection), and a flying leads cable that can be customized with almost any connector you specify. The trip angle can be set by us at the factory or set and reset by you in the field via a hardware switch on the unit.

The nature of the open collector output makes this unit ideal for various tilt switch applications like construction vehicles and agricultural vehicles. More specific tilt switch applications include boom lifts, scissor lifts, and agricultural sprayers. Not sure how an open collector output works? Check out the product manual under Documentation.

Pour en savoir plus sur les principes de la détection d'inclinaison et sur la façon d'intégrer des modules de capteurs de détecteur d'inclinaison dans votre application, consultez notre page d'informations techniques.

Description du produit
Prix
Quantité
±45° Programmable Single-Axis Tilt Switch
±45° Programmable Single-Axis Tilt Switch
PN: 0729-1757-99
$100.72
Sortie 2 collecteurs ouverts
Tension d'alimentation 4.5 V DC to 28 V DC
Courant d'alimentation 3 mA @ 4.5 V DC to 28 V DC
Gamme de fonctionnement ±45º
Axes de mesure 1
Répétabilité ≤0.1°
Compensation nulle ≤5°
Cross-Axis (Roll) Sensitivity ≤0.025° per degree
Long Term Stability/Drift ≤0.1°
Coefficient de température nul ≤0.006° par °C
Coefficient de température de l'échelle 0,1% par °C
Materials Contains magnetic metals
Température de fonctionnement -40 °C à 70 °C
Température de stockage -40 °C à 70 °C
Gamme de capteurs de température -40 °C à 125 °C
Time Constant (63.2% of final output) ≤100 ms
Output Delay 0.5 s
Output Hysteresis 0.35°
Logement Plastique ABS
Connexions électriques 18" cable with 24-gauge wire
Poids 40 g
Longueur 50.8 mm (2.000”)
Largeur 38.1 mm (1.500”)
Hauteur 19.1 mm (0.750”)
Flange Length 76.2 mm (3.000”)
Centre du trou 63.5 mm (2.500”)
Diamètre du trou 4.8 mm (0.190”)
0729-1757-99 Dimensional Drawing
Red Supply (4.5 V DC to 28 V DC)
Black Supply (-)
Green Ground for supply and open collectors
Blue Left trip point open collector
Gray Right trip point open collector
width="350"

The open collector is closed (connected to ground) when non-tripped and open (disconnected from ground) when tripped. It is rated to a maximum of 200 mA when closed. For opposite open collector output functionality (open when non-tripped and closed when tripped), see the 0729-1758-99.

RoHS Compliant
IP50 Environmental Protection (standard, not potted)
IP66 Environmental Protection (potted by request)
Quantité Prix
1 $100.72
10 $85.62
100 $73.07
500 $66.82
1000+ $62.03