0729-1758-99 ±45° Programmable Single-Axis Tilt Switch

Part Number: 0729-1758-99

Features and Benefits:

  • ±45° programmable trip points
  • Single/one axis measurement tilt switch
  • 2 simple to use open collector outputs
  • Response time of ≤100 ms
  • Wide voltage supply range of 4.5 V DC to 28 V DC
  • Works with industry-standard 12 and 24 V DC vehicle batteries
  • Low current device drawing 3mA @ 4.5V and 28V; low power consumption
  • Flying leads cable with custom connectors available for simple integration
  • Superior performance in extreme temperatures and environments
  • Excellent customer support

Our tilt switches (also referred to as a safety switch or tilt switch sensor module) are very similar to our inclinometers, but instead of a continuous output, tilt switches have a discrete on/off output from either a relay or an open collector. This tilt switch has 2 open collector outputs which can be set to trip at specific angles on one axis, up to ±45° tilt. This tilt switch comes in a plastic housing, environmentally sealed and rated up to IP67, with a flying leads cable that can be customized with almost any connector you specify. The trip angle can be set by us at the factory or set and reset by you in the field via a hardware switch on the unit.

The nature of the open collector output makes this unit ideal for various tilt switch applications like construction vehicles and agricultural vehicles. More specific tilt switch applications include boom lifts, scissor lifts, and agricultural sprayers. Not sure how an open collector output works? Check out the product manual under Documentation.

To learn more about the principles of tilt sensing and how to integrate tilt switch sensor modules into your application, see our Technical Information page.

Product Description
±45° Programmable Single-Axis Tilt Switch
±45° Programmable Single-Axis Tilt Switch
PN: 0729-1758-99
Operating Specifications
Settable Trip Angle ±1° to ±45°
Interface 2 open collectors
Polarity Open/non-tripped, Closed/tripped
Number of Axes 1
Trip Angle Accuracy ±0.2°
Trip Angle Repeatability ±0.1°
Supply Voltage 4.5 V to 28 V DC
Null Offset ±5°
Operating Temperature -40 °C to 70 °C
Storage Temperature -40 °C to 70 °C
Physical Characteristics
Housing ABS Plastic
Electrical Connections 457.2 mm (18″) cable with 24 gauge wire
Weight 40 g
Length 50.8 mm (2.000″)
Width 38.1 mm (1.500″)
Height 19.1 mm (0.750″)
Flange Length 76.2 mm (3.000″)
Hole Center 63.5 mm (2.500″)
Hold Diameter 4.8 mm (0.190″)