1-6200-012 Conditionneur de signaux analogiques/RS-232 - Circuit de capteur d'inclinaison électrolytique

Part Number: 1-6200-012


Compatible With: 0703-1602-99, 0703-1603-99, 0703-0711-99


Caractéristiques et avantages :

  • Capteur d'inclinaison électronique de petite taille
  • 0 to 5 V DC analog outputs and RS-232 communications for simple integration
  • Trous de montage et connecteurs pour une intégration simple
  • ADC et DAC 16 bits pour une précision supérieure
  • 0703 series sensors can be mounted directly on the board

All Fredericks electrolytic tilt sensors require a basic electrolytic tilt sensor circuit to generate a tilt angle output. These are often called signal conditioners, signal conditioning boards, or electronic tilt sensors. Fredericks’ single/one axis 0703 series tilt sensors can be mounted directly on this board for a complete inclinometer solution. The sensors are mounted orthogonally (at a 90° angle), making it a dual/two-axis solution. The 16-bit ADC input and 16-bit DAC output resolution allow this signal conditioner to provide exceptional accuracy in a variety of applications.

This electrolytic tilt sensor circuit has 0 to 5 V DC analog outputs and RS-232 communications and mounting holes, making it simple to integrate into your own design. If you’d like to integrate the electrolytic tilt sensor circuit PCB into your own circuit design, The Fredericks Company can offer bills of material, Gerber files, and firmware source files along with engineering support for the integration. We have electrical/hardware, firmware, and mechanical design engineers on staff to assist with this process.

Description du produit
Prix
Quantité
Analog/RS-232 Signal Conditioning Board
Analog/RS-232 Signal Conditioning Board
PN: 1-6200-012
$233.71
Communications RS-232
Sortie analogique 0 V DC to 5 V DC
Analog Input Resolution 16 bits
Résolution de la sortie analogique 16 bits
Gamme de fonctionnement 0% à 100% de la portée du capteur
Tension d'alimentation 7 V DC à 16 V DC
Courant d'alimentation 20 mA @ 7 V DC
Température de fonctionnement -40 °C à 85 °C
Température de stockage -40 °C à 125 °C
Sensors Controlled 1 ou 2
Axes de mesure 1 ou 2
Gamme de capteurs de température -40 °C à 125 °C
Logement Aucune
Connexions électriques 8 Pin, 0.1" spacing
Poids 20 g
Longueur 45 mm (1.77")
Largeur 45 mm (1.77")
Hauteur 12 mm (0.46”)
1-6200-012 Dimensional Drawing
J1 Pin 1 RS-232 ground
J1 Pin 2 Analog output ground
J1 Pin 3 Supply voltage (+)
J1 Pin 4 Supply voltage (-)
J1 Pin 5 RS-232 receive (in)
J1 Pin 6 X axis analog out
J1 Pin 7 Y axis analog out
J1 Pin 8 RS-232 transmit (out)
L1 and L2 Single Axis sensor connections
width="250"

RS-232 Information

Baud Rate 9600 (default, selectable up to 115200)
Data Bits 8
Parity Aucune
Stop Bits 1

RS-232 Commands

‘x’ or ‘X’ X axis output (0 to 65535)
‘y’ or ‘Y’ Y axis output (0 to 65535)
‘t’ or ‘T’ Temperature output (0 to 1023)
‘s’ or ‘S’ Output X, Y, temperature at set intervals
‘r’ or ‘R’ Stop timed interval output
‘1’ to ‘5’ Set delay (in seconds) for set intervals
‘v’ or ‘V’ Product information and version
‘B1’ to ‘B5’ Set baud rate to: ‘B1’ – 9600
‘B2’ – 19200
‘B3’ – 38400
‘B4’ – 57600
‘B5’ – 115200
‘?’ List all commands
None (PCB sub-assembly)
Quantité Prix
1 $233.71
10 $221.96
100 $196.32
500 $182.64
1000+ $174.06