Part Numbers: 1-6200-008, 1-6200-008-MV7
Compatible With: All Fredericks electrolytic tilt sensors
Features and Benefits:
- Small size electronic tilt sensor
- RS-485 communications for simple integration
- Mounting holes and connectors for simple integration
- 0717 series sensors can be mounted directly on the board
- 0703 series sensors can be mounted externally and connected with wires
All Fredericks electrolytic tilt sensors require a basic electrolytic tilt sensor circuit to generate a tilt angle output. These are often called signal conditioners, signal conditioning boards, or electronic tilt sensors. The 0717 series dual/two-axis tilt sensors can be mounted directly on these boards for a complete inclinometer solution. Other single/one axis 0703 series and glass tilt sensors must be mounted externally and connected with wires.
This electrolytic tilt sensor circuit has RS-485 communications and mounting holes, making it simple to integrate into your own design. If you’re looking to integrate the electrolytic tilt sensor circuit PCB into your design, The Fredericks Company can help. We offer bills of material, Gerber files, firmware source files, and engineering support. Our team includes electrical/hardware, firmware, and mechanical design engineers ready to assist you. To request information or support, please complete the Technical Support form, including details about your application and specific needs.
| Interface | RS-485 |
| Analog Input Resolution | 16 bits (10 bits oversampled) |
| Operating Range | 0% to 100% of sensor range |
| Supply Voltage | 3.3 V DC to 5 V DC |
| Supply Current | 9 mA @ 5 V DC, 6 mA @ 3.3 V DC |
| Operating Temperature | -40 °C to 85 °C |
| Storage Temperature | -40 °C to 125 °C |
| Sensors Controlled | 1 or 2 |
| Axes of Measurement | 1 or 2 |
| Temperature Sensor Range | -40 °C to 125 °C |
| Housing | None |
| Electrical Connections (1-6200-008) |
7 Pin, 2.54 mm (0.1") spacing |
| Electrical Connections (1-6200-008-MV7) |
7 Pin, 2.54 mm (0.1") spacing |
| Weight | 4 g |
| Length | 32 mm (1.25") |
| Width | 32 mm (1.25") |
| Hole Center | 27 mm (1.05”) |
| J1 Pin 1 (+5) | Supply (+) |
| J1 Pin 2 (C) | Supply (-) |
| J1 Pin 3 (C) | Ground |
| J1 Pin 4 (B) | RS-485 B (-) |
| J1 Pin 5 (A) | RS-485 A (+) |
| J1 Pin 6 (C) | Ground |
| J1 Pin 7 (C) | Ground |
| L1 | Dual axis sensor connection |
| J3 | Single Axis sensor x axis connection |
| J4 | Single axis sensor y axis connection |
RS-485 Information
| Baud Rate (default 9600) | 1200 to 38400 |
| Data Bits | 8 |
| Parity | None |
| Stop Bits | 1 |
| Address (default 99) | 01 to 99 |
| Maximum Signal Conditioners on Bus | 32 |
RS-485 Commands (Assume default address 99)
| *9911# | X axis output (0 to 65535) |
| *9921# | Y axis output (0 to 65535) |
| *9941# | Temperature output (0 to 1023) |
| *9980# | Read product information |
| *9981Axx# | Change address to xx (01 to 99) |
| *9982D# | Read user information |
| *9984Z# | Set current position as zero |
| *9984R# | Clear saved zero position |
| *9988Rx# | Change baud rate to x (1 to 6) |
| *9989B# | Reset to factory default settings |
| RoHS Compliant |
Product Documentation
| 1-6200-008 Datasheet |
| 1-6200-008-MV7 Datasheet |
| 1-6200-008 Instruction Manual |
| 1-6200-008 STEP File |
| 1-6200-008-MV7 STEP File |
| Arduino RS-485 Communications INO File |
Application Notes
Tools
| Angle Measurement Converter |
| Web Serial Terminal |
Videos
| What Is An Electrolytic Tilt Sensor? |
Brochures
| Tilt Measurement Product Catalog |
1-6200-008 and 1-6200-008-MV7
Quantity Discounts
>
| Quantity | Price |
| 1 | $69.13 |
| 10 | $65.30 |
| 100 | $58.75 |
| 500 | $47.24 |
| 1000+ | $41.98 |