1-6200-008 RS-485シグナルコンディショナ-電解傾斜センサ回路

Part Numbers: 1-6200-008, 1-6200-008-MV7


Compatible With: All Fredericks electrolytic tilt sensors


特長と効果

  • 小型電子式チルトセンサー
  • RS-485通信で簡単に統合
  • 取り付け穴とコネクタで簡単に統合
  • 0717 series sensors can be mounted directly on the board
  • 0703 series sensors can be mounted externally and connected with wires

All Fredericks electrolytic tilt sensors require a basic electrolytic tilt sensor circuit to generate a tilt angle output. These are often called signal conditioners, signal conditioning boards, or electronic tilt sensors. The 0717 series dual/two-axis tilt sensors can be mounted directly on these boards for a complete inclinometer solution. Other single/one axis 0703 series and glass tilt sensors must be mounted externally and connected with wires.

この電解式チルトセンサー回路は、RS-485通信と実装穴を備えており、独自の設計に簡単に組み込むことができます。電解チルトセンサー回路基板を独自の回路設計に組み込むことをご希望の場合、フレデリックス社では、部品表、ガーバーファイル、ファームウェアのソースファイルをエンジニアリングサポートと共に提供することができます。当社には、電気/ハードウェア、ファームウェア、機械設計エンジニアが常駐しており、このプロセスをサポートします。

製品概要
価格
センサタイプ
数量
RS-485信号処理ボード
RS-485 Signal Conditioning Board
PN: 1-6200-008
$69.13

RS-485 Signal Conditioning Board with Molex Connector
RS-485 Signal Conditioning Board with Molex Connector
PN: 1-6200-008-MV7
$69.13

インターフェース RS-485
Analog Input Resolution 16 bits (10 bits oversampled)
動作範囲 センサーレンジの0%~100
電源電圧 DC3.3V~DC5V
供給電流 9 mA @ 5 V DC, 6 mA @ 3.3 V DC
動作温度 -40 °C ~ 85 °C
保存温度 -40 °C ~ 125 °C
Sensors Controlled 一、二
測定軸 一、二
温度センサ範囲 -40 °C ~ 125 °C
住宅 なし
Electrical Connections
(1-6200-008)
7 Pin, 2.54 mm (0.1") spacing
Electrical Connections
(1-6200-008-MV7)
7 Pin, 2.54 mm (0.1") spacing
重量 4 g
長さ 32 mm (1.25")
32 mm (1.25")
ホールセンター 27 mm (1.05”)
1-6200-008 Dimensional Drawing
J1 Pin 1 (+5) Supply (+)
J1 Pin 2 (C) Supply (-)
J1 Pin 3 (C) Ground
J1 Pin 4 (B) RS-485 B (-)
J1 Pin 5 (A) RS-485 A (+)
J1 Pin 6 (C) Ground
J1 Pin 7 (C) Ground
L1 Dual axis sensor connection
J3 Single Axis sensor x axis connection
J4 Single axis sensor y axis connection
width="250"

RS-485 Information

Baud Rate (default 9600) 1200 to 38400
Data Bits 8
Parity なし
Stop Bits 1
Address (default 99) 01 to 99
Maximum Signal Conditioners on Bus 32

RS-485 Commands (Assume default address 99)

*9911# X axis output (0 to 65535)
*9921# Y axis output (0 to 65535)
*9941# Temperature output (0 to 1023)
*9980# Read product information
*9981Axx# Change address to xx (01 to 99)
*9982D# Read user information
*9984Z# Set current position as zero
*9984R# Clear saved zero position
*9988Rx# Change baud rate to x (1 to 6)
*9989B# Reset to factory default settings
RoHS Compliant

>

数量 価格
1 $69.13
10 $65.30
100 $58.75
500 $47.24
1000+ $41.98