傾斜測定

The Fredericks Company offers both electrolytic tilt sensors and MEMS technology for an innovative and proven method of measuring anywhere from ±90° down to ±0.5° with high accuracy ranging from ±0.1° (±360 arcseconds) to ±0.0003° (or ±1 arcsecond). Generally, as the range of a tilt sensor decreases, the accuracy increases, which can be seen by looking at our tilt measurement options below. Note that our highest accuracy and glass sensor solutions are typically higher cost, and we’re here to help with a cost-benefit analysis of specific solutions. Our tilt sensors are used in a wide variety of applications ranging from RV leveling and construction vehicle leveling to extremely high accuracy markets like geotechnical and structural health monitoring, and everything in between.

 

In addition to the tilt sensor component for board-level designs, we also offer complete electrolytic tilt sensor circuits, electrolytic inclinometers, and MEMS inclinometers that are environmentally sealed and designed for industrial and outdoor use. We have an engineering department including electrical, PCB layout, software/firmware, and mechanical design expertise, so we’ll work with you to build a solution specific to your needs. A complete list of all of our tilt measurement solutions is below.

 

電解式チルトセンシングの原理と、チルトセンサをアプリケーションに組み込む方法の詳細については、技術情報のページを参照してください。

Wide Range Tilt Sensors

These electrolytic tilt sensors are designed to give wide range measurement up to ±60° with high accuracy from ±0.1° to ±0.05° in one or two axes. They're also the lowest cost sensors we offer.

All electrolytic sensors require an electrolytic tilt sensor circuit (also commonly referred to as signal conditioning or a signal conditioner) to provide a tilt angle output. This can be built into your system or you can purchase a circuit we’ve designed. Our circuits are optimized for the best performance from our sensors.

To learn more about the principles of electrolytic tilt sensors and how to integrate our sensors into your application, see our Technical Information page.

ワイドレンジ電解チルトセンサー
0717-4313-99
動作範囲:±50
繰り返し精度:±0.05
ワイドレンジ電解チルトセンサー
0717-4315-99
動作範囲:±60
繰り返し精度:±0.05
ワイドレンジ電解チルトセンサー
0717-4318-99
動作範囲:±60
繰り返し精度:±0.1
ワイドレンジ電解チルトセンサー
0717-4319-99
動作範囲:±50
繰り返し精度:±0.1
ロープロファイル・ワイドレンジ電解チルトセンサー
0717-4321-99
動作範囲:±40
繰り返し精度:±0.1
ロープロファイル・ワイドレンジ電解チルトセンサー
0717-4322-99
動作範囲:±45
繰り返し精度:±0.1
ロープロファイル・ワイドレンジ電解チルトセンサー
0717-4323-99
動作範囲:±50
繰り返し精度:±0.1

Mid-Range Tilt Sensors

These electrolytic tilt sensors are designed to give mid-range measurement up to ±25° with very high accuracy of at least ±0.005° in one axis. This means you’ll need two sensors to measure in two axes. These sensors are much less expensive than any of our glass solutions, but they're slightly more expensive than our wide-range sensors.

All electrolytic sensors require an electrolytic tilt sensor circuit (commonly referred to as signal conditioning or a signal conditioner) to provide an angle output. This circuit can be built into your system or you can purchase circuitry we’ve designed. Our circuits are optimized for the best performance from our sensors.

To learn more about the principles of electrolytic tilt sensors and how to integrate our sensors into your application, see our Technical Information page.

ミッドレンジ電解チルトセンサー
0703-1602-99
動作範囲:±25
反復性:±0.005

Narrow Range Tilt Sensors

These electrolytic tilt sensors are designed to give narrow range measurement up to ±3° with very high accuracy of at least ±0.001° in one axis. This means that you’ll need two sensors to measure in two axes. These sensors are slightly more expensive than our wide-range sensors, but comparable in cost to our mid-range sensors. They're also much less expensive than any of our glass solutions.

All electrolytic sensors require an electrolytic tilt sensor circuit (commonly referred to as signal conditioning or a signal conditioner) to provide a tilt output. This circuit can be built into your system or you can purchase circuitry we’ve designed. Our circuitry is optimized for the best performance from our sensors.

To learn more about the principles of electrolytic tilt sensors and how to integrate our sensors into your application, see our Technical Information page.

狭角電解チルトセンサー
0703-0711-99
動作範囲:±3°。
再現性:±0.001

ガラスミッドレンジ

These electrolytic tilt sensors offer mid-range measurement of ±10° with extremely high accuracy of at least ±0.0005° in one axis. This means you’ll need two sensors to measure in two axes. These sensors are more expensive than any of our metal solutions because of their higher accuracy and glass design.

All electrolytic sensors require electrolytic tilt sensor circuits (commonly referred to as signal conditioning or signal conditioners) to provide an angle output. This circuit can be built into your system or you can purchase circuitry that we’ve designed that’s optimized for the best performance from our sensors.

To learn more about the principles of electrolytic tilt sensors and how to integrate tilt sensors into your application, see our Technical Information page.

ミッドレンジガラス電解チルトセンサー
0737-0101-99
動作範囲:±10
繰り返し精度:±0.0006
中波長域電解チルトセンサーを封入
カプセル化された 0719-3705-99
動作範囲:±10
繰り返し精度:±0.0006

ガラス狭域

These electrolytic tilt sensors are have narrow range measurement from ±3° to ±0.5° with extremely high accuracy of ±0.0008° to ±0.0001° in one axis. This means you’ll need two sensors to measure in two axes. These sensors are more expensive than any of our Fredericks metal solutions because of their higher accuracy and glass design.

All electrolytic sensors require electrolytic tilt sensor circuits (commonly referred to as signal conditioning or signal conditioners) to provide an angle output. This circuit can be built into your system or you can purchase circuitry that we’ve designed that’s optimized for the best performance from our sensors.

To learn more about the principles of electrolytic tilt sensors and how to integrate tilt sensors into your application, see our Technical Information page.

0711-0763-99
0711-0763-99
動作範囲:±1度
再現性:±0.0008
0711-0768-99
0711-0768-99
動作範囲:±3°。
再現性:±0.0008
0727-1203-99
0737-1203-99
動作範囲:±0.5度
繰り返し精度:±0.0003度
0719-1138-99
カプセル化された 0719-1138-99
動作範囲:±1度
再現性:±0.0008
0719-1143-99
カプセル化された 0719-1143-99
動作範囲:±3°。
再現性:±0.0008
0719-3703-99
カプセル化された 0719-3703-99
動作範囲:±0.5度
繰り返し精度:±0.0003度

シグナルコンディショナ - 電解傾斜センサ回路

Electrolytic tilt sensors require a basic electrolytic tilt sensor circuit to generate a tilt angle output. These are often called signal conditioners, signal conditioning boards, or electronic tilt sensors. In most cases, our sensors can be mounted directly onto the PCB. These electrolytic tilt sensor circuits have many optional outputs including analog 0 to 5 V DC, RS-232/RS-485, PWM, and SPI communications.

Our electronic tilt sensors include convenient mounting holes and connectors allowing you to simply integrate our circuits into your designs. If you’d prefer to integrate our electrolytic tilt sensor circuit into your board-level design, we have an engineering department that can help! We have electrical, PCB layout, software/firmware, and mechanical design expertise, so we’ll work with you to build an electronic tilt sensor specific to your needs.

1-6200-005
インターフェイスです。SPI
1-6200-006
インターフェイス。RS-232
1-6200-007
インターフェイスです。アナログおよびPWM
1-6200-008
インターフェイスRS-485
Analog/RS-232 Signal Conditioner
1-6200-012
インターフェイス。アナログおよびRS-232

MEMSセンサ - 傾斜計

Our MEMS tilt sensors and inclinometers are the only products we offer that utilize MEMS core tilt sensing technology. These analog and digital inclinometers are metal-housed, environmentally-sealed analog and digital inclinometer sensors with an IP (ingress protection rating) of IP67. Inclinometers are used in many markets and industries including construction and agricultural vehicles where inclinometers provide safety information and other vehicle parameters to the operator.

These analog and digital inclinometer sensors offer a ±90° operating range with accuracy of ±0.1° with optional outputs of analog 0 to 5 V DC and RS-485 digital communications. Analog and digital inclinometers with MEMS tilt sensors are higher cost than our electrolytic inclinometer sensors because of the high accuracy internal MEMS sensor, t. For a lower cost option, view our electrolytic inclinometer sensors.

To learn more about the principles of electrolytic tilt sensing and how to integrate digital inlcinometers and MEMS tilt sensors into your application, see our Technical Information page.

075X-X002-99 MEMS - フレデリクス
0751-3002-99
動作範囲:±30
インターフェイスです。アナログ
075X-X002-99 MEMS - フレデリクス
0751-9002-99
動作範囲:±90
インターフェイスです。アナログ
075X-X002-99 MEMS - フレデリクス
0750-3002-99
動作範囲:±30
インターフェイスRS-485
075X-X002-99 MEMS - フレデリクス
0750-9002-99
動作範囲:±90
インターフェイスRS-485

傾斜計センサ

The electrolytic versions of our analog and digital inclinometer sensors utilize our Fredericks electrolytic tilt sensors and electrolytic tilt sensor circuits are the lowest cost environmentally sealed (up to IP67) inclinometer sensors we offer with a measurement range up to ±60° and repeatability from ±0.1° to ±0.05° in one or two axes. These inclinometer sensors have plastic housings and have a cable with flying leads that can be customized with a connector you specify. Optional outputs for our inclinometer sensors include analog 0 to 5 V DC, RS-232, and RS-485 digital communications.

0729-1751-99
0729-1751-99
動作範囲:±60
インターフェイスです。SPI
0729-1752-99
0729-1752-99
動作範囲:±60
インターフェイス。RS-232
0729-1755-99 アナログ式傾斜計
0729-1753-99
動作範囲:±60
インターフェイスです。アナログおよびPWM
0729-1754-99 デジタル傾斜計センサー
0729-1754-99
動作範囲:±60
インターフェイスRS-485
0729-1755-99
0729-1755-99
動作範囲:±60
インターフェイスです。アナログ
0729-1759-99
0729-1759-99
動作範囲:±60
インターフェイス。RS-232
0729-1760-99 RS-485 IP67デジタル傾斜計
0729-1760-99
動作範囲:±60
インターフェイスRS-485
0729-1760-04
0729-1760-04
動作範囲:±10
インターフェイスRS-485
0729-1765-99 アナログ RS-232 傾斜計
0729-1765-99
動作範囲:±25
インターフェイス。アナログおよびRS-232
High precision digital inclinometer from The Fredericks Company with UART/TTL communications.
F225-00T-003-01
動作範囲:±25
Interface: UART/TTL

チルトスイッチ

Our tilt switches (also referred to as a safety switch or tilt switch sensor module) are very similar to our inclinometers, but instead of a continuous output, tilt switches have a discrete on/off output from either a relay or an open collector. The angle where the tilt switch output changes can be set to specific ranges in one or two axes, up to ±45° tilt. These tilt switches come in plastic or metal housings, environmentally sealed up to IP67, with a cable and flying leads that can be customized with almost any connector you specify. The trip angle can be set by us at the factory or set and reset by you in the field.

The nature of the relay and open collector outputs make these units ideal for various tilt switch applications like construction vehicles and agricultural vehicles. More specific tilt switch applications include boom lifts, scissor lifts, and agricultural sprayers.

To learn more about the principles of tilt sensing and how to integrate tilt switch sensor modules into your application, see our Technical Information page.

0729-1763-99 リレーチルトスイッチ
0729-1763-XX
動作範囲:±1度~±45度
インターフェイス。リレーとRS-232
0729-1736-99 リレーチルトスイッチ
0729-1736-99
動作範囲:±1度~±45度
インターフェイス。リレーとRS-232
1軸チルトスイッチ
0729-1757-99
動作範囲:±1度~±45度
インターフェイスです。オープンコレクタ
1軸チルトスイッチ
0729-1758-99
動作範囲:±1度~±45度
インターフェイスです。オープンコレクタ

レガシーチルト製品

0703-0703-99
0703-0703-99
動作範囲:±2度
繰り返し精度:±0.0014
電解式傾斜センサー
0717-2201-99
動作範囲:±70
繰り返し精度:±0.003
0717-5201-99
0717-5201-99
動作範囲:±70
繰り返し精度:±0.003
0717-4304-99
0717-4304-99
動作範囲:±60
繰り返し精度:±0.1
0728-1025-99
0728-1025-99
動作範囲:±85
繰り返し精度:±0.05
0737-0604-99
0737-0604-99
動作範囲:±0.5度
繰り返し精度:±0.00014
0719-3701-99
カプセル化 0719-3701-99
動作範囲:±0.5度
繰り返し精度:±0.00014
0716-2201-99
0716-2201-99
動作範囲:±70
繰り返し精度:±0.003
0716-5201-99
0716-5201-99
動作範囲:±70
繰り返し精度:±0.003