Televac® MX200 EthernetIP Vacuum Controller

  • 구성성이 높은 디자인으로 장착 가능한 랙
  • PC와의 간단한 연결을 위해 모든 장치에 포함된 USB
  • 180° 시야각을 가진 고대비 OLED 디스플레이
  • 선택 가능한 측정 단위(토르, mbar, 파스칼)
  • 현장 업그레이드 가능한 펌웨어용 부트로더
  • 질소/공기, 아르곤, 수소, 헬륨, 네온, 크립톤 및 이산화탄소에 포함된 가스 변환 기능
  • 연결된 모든 패시브 진공 게이지에 대한 아날로그 출력(0 ~ 10V DC)
  • 사용자 구성 가능한 아날로그 출력 범위
  • 우수한 고객 지원
  • ISO 17025 accredited and NIST traceable calibrations optional
  • 프로그래밍 가능한 IP 주소로 DHCP 사용 또는 비활성화
  • 네트워크/모듈 상태/포트 데이터 활동을 위한 상태 LED
  • 10/100 Mbit, 절반 또는 전체 이중 포트 작업
  • 네트워크 및 단위 데이터 및 설정에 대한 웹 액세스 보안

The Televac® MX200 EthernetIP vacuum controller (also called a vacuum control unit or vacuum pressure controller) can be connected to up to 10 Televac® passive vacuum gauges including cold cathode gauges, convection gauges, diaphragm gauges, and thermocouple vacuum gauges. It also includes 0 to 10 V DC analog outputs for each vacuum gauge connected to the vacuum controller, EthernetIP/USB digital communications for simple integration with a PC or PLC, and up to 8 optional set point relays to act as a vacuum pressure controller for process control in your vacuum system.

MX200 진공 컨트롤러의 사용자 인터페이스에는 6개의 터치 컨트롤과 180° 시야각 OLED 디스플레이가 포함되어 있으며, 이 디스플레이는 선택한 측정 장치와 셋포인트 릴레이의 상태와 함께 최대 8개의 연결된 진공 게이지의 측정을 동시에 보여줍니다. 이 진공 제어 장치는 질소/공기, 아르곤, 수소, 헬륨, 네온, 크립톤 및 이산화탄소를 포함한 여러 가스 유형을 지원합니다. MX200 진공 컨트롤러는 모듈식 장치이므로 필요에 따라 진공 감지 솔루션을 선택할 수 있습니다.

Looking for active vacuum gauges instead of a controller? Check out our active gauges. Need a passive vacuum gauge to go with your MX200? Check out our passive vacuum gauges. Want to configure an MX200 and purchase online? Check out our MX200 Online Order Hub.

제품 설명
Televac® MX200 EthernetIP Vacuum Controller
Televac® MX200 EthernetIP Vacuum Controller
PN: 2-7900-037
악기 부품 번호
MX200 베이스 유닛 USB/이더넷IP 2-7900-037
MX200 베이스 유닛 USB/RS-232/RS-485 2-7900-034
모듈 부품 번호 슬롯(최대)
세트 포인트 쿼드 릴레이 2-6200-411 1 (2)
1E 듀얼 페조 다이어프램 2-6200-220 1 (5)
1F 듀얼 피에조 다이어프램 2-6200-244 1 (5)
2A 듀얼 써모커플 2-6200-486 1 (5)
4A 이중 대류 2-6200-415 1 (5)
7B 페닝 그람트론 콜드 캐터드 2-6200-227 2 (3)
7EF DI 그마트론 콜드 캐터드 2-6200-285 1 (5)
Capacitance Diaphragm (24 V DC) 2-6200-451 1 (5)
Capacitance Diaphragm (15 V DC) 2-6200-452 1 (5)
운영 범위 1*10-11 Torr to 10,000 Torr
통신 USB/이더넷IP
아날로그 출력 0 ~ 10 V DC (센서 당 1 개)
아날로그 출력 해상도 16 비트
프로그래밍 가능한 집합 점 모듈당 4개(최대 8개)
점 유형 설정 릴레이
공급 전압 115/230 V AC (2/1 A), 50-60Hz
최대 전력 230 W
교정 매체 건조한 공기 또는 질소
작동 온도 0°C ~ 50°C
보관 온도 -20°C ~ 70°C
판독 가능한 거리 표시 5m(16피트)
제어되는 최대 센서 10
최대 센서 표시 8
응답 시간 ≤10ms
P1 EthernetIP RJ45 port 1
P2 EthernetIP RJ45 port 2
NS USB communications
MS Module status LED
증권 시세 표시기 USB communications
Setup Lock Front panel lock switch
BTLD Bootload button
MX200 EthernetIP Vacuum Controller Electrical Connections (Pin Diagram)
Connectors (2) RJ45
Ports 10/100 Mbit, half/full duplex
DHCP Enable or disable
   
Class 1 Connections  
Connection Type Point-to-point, multicast
Target to Originator Instance ID 100
Data Size 40
Originator to Target Instance ID 150
Data Size 4
Configuration Instance 3
Supported Connections 4
Requested Packet Interval 1 to 3200 ms
Trigger Types Cyclic, change of state
Priorities Low, high, schedule, urgent
   
Class 3 Connections  
Service 0xE (get), 0x10 (set)
Class 0xA2
Instance See ADI table
Data Value Attribute 5
Supported Connections 6
Requested Packet Interval 100 to 10000 ms
Connection Type 응용 프로그램
Priority 낮은

The MX200 has up to eight relay set points. The relays are located on two optional relay modules with four set points each. Individual relay statuses are displayed on the front panel. The heavy-duty relays have an SPDT (1 Form C) contact form and are rated for 24 V DC. They have a maximum current rating of 8 A at 250 V AC or 5 A at 30 V DC.

주택 알루미늄
전기 연결 Power cord (IEC 60320 C-13)
Weight (Base Unit) 2.2 kg (5 lbs)

MX200 Vacuum Controller Electrical Connections (Pin Diagram)

MX200 Vacuum Controller Electrical Connections (Pin Diagram)

MX200 Vacuum Controller Electrical Connections (Pin Diagram)

Certified to UL 61010-1
CE certified to EN61326-1:2006
Certified to CAN/CSA C22.2 No. 61010-1-12
EAC certified
ISO 17025 accredited calibration optional
NIST 추적 가능한 교정 옵션

제품 설명서

MX200 EthernetIP Datasheet
MX200 사용 설명서
MX200 EthernetIP Instruction Manual Addendum
MX200 이더넷IP EDS 파일
Televac®️ Vacuum Calibration Tolerances

3D Model (STEP File)

MX200 Vacuum Controller STEP File

응용 프로그램 노트

Televac®️ Application Note 3008: MX200 to PC Interfacing and Communications
Televac®️ Application Note 3011: MX200 and MM200 Analog Output Comparisons
Televac® Application Note 3015: Recommended Practices for Vacuum Calibration
Televac® Application Note 3016: MX200 EthernetIP Loading EDS Files for Rockwell Automation Allen-Bradley CompactLogix PLCs
Televac® Application Note 3017: MX200 EthernetIP Setup and Troubleshooting Guide for EthernetIP Option 1
Televac® Application Note 3017: MX200 EthernetIP Setup and Troubleshooting Guide for EthernetIP Option 2
Televac® Application Note 3029: Televac® EthernetIP Vacuum Controllers Creating and Mapping Class 3 Connections for Rockwell Automation Allen-Bradley CompactLogix PLCs

동영상

MX200 Demonstration Video

도구

Televac® MX200 Online Order Hub
원격® 진공 측정 컨버터

Case Studies

사례 연구: 아르곤 국립 연구소

기사

Vacuum Measurement Using Modern Cold Cathode Technology

Brochures

Televac®️ Vacuum Measurement Product Catalog
MX200 시스템 개조
MX200 고에너지 물리학용 솔루션
MX200 대학 연구를 위한 솔루션
MX200 진공 용용
진공 용광로를 위한 풀 레인지 솔루션
Comparison of Vacuum Controller Features: MX200 and MM200

Download STEP File

부품 번호 설명 STEP File
2-7900-03X MX200 진공 컨트롤러 Download

CompactLogix™ 로크웰 오토메이션, Inc.의 등록 상표입니다. 다른 모든 상표는 해당 소유자의 재산입니다.