1-6200-006 RS-232 Signal Conditioner - Electrolytic Tilt Sensor Circuit

Part Number: 1-6200-006


Compatible With: All Fredericks electrolytic tilt sensors


Features and Benefits:

  • Small size electronic tilt sensor
  • RS-232 communications for simple integration
  • Mounting holes and connectors for simple integration
  • 0717 series sensors can be mounted directly on the board
  • 0703 series can be mounted externally and connected with wires

All Fredericks electrolytic tilt sensors require a basic electrolytic tilt sensor circuit to generate a tilt angle output. These are often called signal conditioners, signal conditioning boards, or electronic tilt sensors. The 0717 series dual/two-axis tilt sensors can be mounted directly on these boards for a complete inclinometer solution. Other single/one axis 0703 series and glass tilt sensors must be mounted externally and connected with wires.

This electrolytic tilt sensor circuit has RS-232 communications and mounting holes, making it simple to integrate into your own design. If you’d like to integrate the electrolytic tilt sensor circuit PCB into your own circuit design, The Fredericks Company can offer bills of material, Gerber files, and firmware source files along with engineering support for the integration. We have electrical/hardware, firmware, and mechanical design engineers on staff to assist with this process.

ImageSignal Conditioning BoardPart NumberPrice
RS-232 Signal Conditioner
RS-232 Signal Conditioning Board1-6200-006$65.84

Operating Specifications
Communications RS-232
Supply Voltage 3.3 V DC to 5 V DC
Supply Current 16 mA @ 5 V DC, 11 mA @ 3.3 V DC
Operating Temperature -40 °C to 85 °C
Storage Temperature -40 °C to 125 °C
Operating Range 0% to 100% of connected sensor range
Output 16 bit (0 to 65535 counts)
Temperature Sensor Range -40 °C to 125 °C (10 bit resolution)
Physical Characteristics
Housing None
Electrical Connections 7 Pin, 2.54 mm (0.1”) spacing
Weight 4 g
Length 32 mm (1.25″)
Width 32 mm (1.25″)
Hole Center 27 mm (1.05″)