Televac® MM200 Vacuum Controller

The MM200 will be discontinued on September 30, 2022.

The direct replacement vacuum controller is the MX200 Vacuum Controller.

Interested in upgrading your MM200 to the new MX200? Check out MM200 to MX200 Upgrade Program!

  • Customer configurable design
  • Rack mountable
  • Built-in self-diagnostics
  • Easy-to-read large LED display
  • Selectable units of measurement (torr/micron, pascal, millibar)
  • Digital interface
  • One analog output per sensor
  • Excellent customer support

The Televac® MM200 controls any Televac® vacuum sensor including cold cathode, convection, diaphragm, hot ion, and thermocouple sensors. It also has optional features including up to 8 relay set points and RS-232/RS-485 communications. The large, bright LED display makes it easy to read from a distance. The MM200 is a modular unit, allowing customers to choose a vacuum sensing solution specific to their needs.

Operating Range1*10-11 Torr to 7600 Torr Max
Analog Output0 to 10 V DC (1 per sensor)
Analog Output Resolution12 Bits
Programmable Set Points4 per module (8 max)
Set Point TypeRelay
Supply Voltage115/230 V AC (2/1 A), 50-60 Hz
Maximum Power230 W
Calibration MediumDry air or nitrogen
Operating Temperature0 °C to 50 °C
Storage Temperature-40 °C to 85 °C
Display Readable Distance10 m (35 ft)
MM200 Vacuum Controller Part Number
MM200 Base Unit 2-7900-20
Quad Relay Module 2-6200-411
RS-232/485 Communications Module 2-6200-213
2A Dual Thermocouple Module 2-6200-486
4A Dual Convection Module 2-6200-215
7B Penning Magnetron Cold Cathode Module 2-6200-227
7FCS DIM Cleanable CC Quick Start Module 2-6200-285
1E Dual Piezo Diaphragm Module 2-6200-220
1F Dual Piezo Diaphragm Module 2-6200-244
Capacitance Diaphragm Module 2-6200-252
3F Mini Bayard-Alpert Hot Ion Module 2-6200-291
Simulators Part Number
2A Octal, Red Line 2-2100-237
2A Octal, 3 Point: 0, 100, 1000 Torr 2-2100-242
2A Mini, Red Line 2-2100-240
2A Mini, 3 Point: 0, 100, 1000 Torr 2-2100-241
4A, Red Line 2-2119-000
4A, 3 Point: 0, 1, 760 Torr 2-2119-003
7B, 2 Point: 10-3, 10-5 Torr 2-2100-93
7E/7F/7FC/7FCS, 2 Point: 10-3, 10-5 Torr 2-2145-000
Standard Cables
Length 2A Cable 4A Cable 7B Cable
10 ft (3 m) 2-9800-52 2-9819-010 2-9800-09
20 ft (6.1 m) 2-9800-53 2-9819-020 2-9800-41
35 ft (10.6 m) 2-9800-55 2-9819-035 2-9800-42
50 ft (15.2 m) 2-9800-56 2-9819-050 2-9800-43
Length Mini BA Cable 7 E/F Cable
10 ft (3 m) 2-9854-10 2-9841-010
20 ft (6.1 m) 2-9854-20 2-9841-020
35 ft (10.6 m) 2-9854-35 2-9841-035
50 ft (15.2 m) 2-9854-50 2-9841-050

CC-10 Active Vacuum Gauge – This gauge utilizes dual-sensor technology to replace multiple conventional vacuum gauges, permitting seamless measurement of twelve decades of pressure. It has a variety of features including a wide range of measurement from 1 × 10-9 Torr up to 1000 Torr, RS-485 communications, three programmable set points, and a selectable analog output and a bright LED display. Options can be set from either four touch controls located on the front of the unit or through RS-485 communications. The simplicity of use and wide measurement range make this unit an excellent choice for a variety of vacuum applications.

MC300 Vacuum Sensor Controller – The MC300 controls up to two Televac thermocouple or convection rough vacuum sensors and an optional cold cathode or mini hot ion high vacuum sensor. It features 4 relay set points and large, bright LED displays, making it easy to read from a distance.

Freeze drying and food packaging
Heat treating and vacuum furnaces
Thin film deposition and coating processes
Research and development
Leak detection
Pharmaceutical product processes