Телевизор АН 3016: MX200 EthernetIP Загрузка файлов EDS для ПЛК Allen-Bradley CompactLogix от Rockwell Automation

Вакуумный контроллер MX200 EthernetIP Загрузка файлов EDS для ПЛК Allen-Bradley CompactLogix компании Rockwell Automation

Описание

This application note explains the process for downloading an Electronic Data Sheet (EDS) file to a Rockwell Automation Allen-Bradley CompactLogix Programmable Logic Controller (PLC). The EDS file contains all of the vendor and module
information for the EthernetIP networking device, as well as a complete list of Class 3 parameters and Class 1 connection information. A PLC operator can then use the file to look up data variable link paths, sizes, and data
types, and establish desired connections for operation.

Please see the MX200 EthernetIP Instruction Manual for a full description on Class 1 and Class 3 connections, and a complete ADI table including data instance, name, array length, access, and description, and for information on
configuring the IP Address.

Loading the EDS File

1.1 Connect the MX200 EthernetIP port on the back of the unit to your PLC

1.2 Using Rockwell Automation’s EDS Wizard, import the EDS file by selecting Tools -> EDS Hardware Installation Tool

1.3 Browse to locate the EDS file. Before completing this step, be sure that the file “Televac_MX200_Ethernetip.eds” has been downloaded. Once the EDS file has been loaded, click Next

1.4 Verify the file installation test results

1.5 If desired, change the icon for the module, then click Next.

1.6 Confirm the registration

1.7 Click Finish.

1.8 To update the file in the future, the file must first be unregistered. Then follow steps 1 through 7.

Setting up a Connection

2.1 Add the new module to the network. To do this, right click on Ethernet -> New Module

2.2 Find the module by typing “fredericks” into the search bar. Select the Televac MX module.

2.3 Set the device Name and IP Address, and then click Change module definition.

2.4 Set the data type to real

2.5 You should now be able to establish connections to the data variables provided within the EDS. Refer to the EthernetIP for MX200 Instruction Manual for a more information related to setup and operation.

Похожие продукты

Вакуумный контроллер Televac MX200 EthernetIP - от 1E-11 Торр до 1E4 Торр - Компания Фредерикс

Вакуумный контроллер MX200 EthernetIP

- от 1*10-11 Торр до 1*104 Торр
- Управление до 10 вакуумметрами Televac®
- Цифровые коммуникации EthernetIP/USB
- Легко читаемый OLED-дисплей