0729-1736-99 ±35° 可编程双轴倾斜开关

零件编号:0729-1736-99


特点和优点。

  • ±35°可编程跳闸点
  • 双/双轴测量倾斜开关
  • 1个简单易用的继电器输出
  • 响应时间≤100 ms
  • 7 V DC至30 V DC的宽电压供应范围。
  • 与工业标准的12和24V直流汽车电池一起工作
  • 低电流器件,在12 V DC下消耗30 mA;低功耗
  • 带定制连接器的飞线电缆可用于简单的集成。
  • 在极端温度和环境下的卓越性能
  • 优秀的客户支持

Our tilt switches (also referred to as a safety switch or tilt switch sensor module) are very similar to our inclinometers, but instead of a continuous output, tilt switches have a discrete on/off output from either a relay or an open collector. This tilt switch has 1 relay output (omnidirectional) which can be set to trip at specific angles in two axes, up to ±35° tilt. This tilt switch comes in a plastic housing, environmentally sealed and rated IP66, with a flying leads cable that can be customized with almost any connector you specify. The trip angle can be set by us at the factory or set and reset by you in the field via the RS-232 communications.

继电器输出的性质使该装置成为建筑车辆农业车辆等各种倾斜开关应用的理想选择。更具体的倾斜开关应用包括臂式升降机、剪式升降机和农业喷雾器。

要了解更多关于倾斜传感的原理以及如何将倾斜开关传感器模块集成到您的应用中,请参见我们的技术信息页面。

产品介绍
价格
数量
±35° 可编程双轴倾斜开关
±35°可编程双轴倾斜开关
PN: 0729-1736-99
$154.80
产量 1 relay
电源电压 7 V DC 至 30 V DC
供应电流 30 mA @ 12 V DC
工作范围 ±35º
最小行程角 ±1º
测量轴 2
空心偏移 ≤5°
重复性 ±0.1°
Trip Accuracy ±0.2°
Output Trip Delay (default, settable) 1 s
Output Return Delay (default, settable) 0.5 s
Output Hysteresis (default, settable) 0.25°
Output Filter (default, settable) 0 s
Cross-Axis Sensitivity ≤0.025° per degree
Long Term Stability/Drift ≤0.1°
Materials Contains magnetic metals
操作温度 -35 °C to 70 °C
储存温度 -35 °C to 70 °C
住房 ABS塑料
电气连接 18" cable with 24-gauge wire
重量 150 g
长度 53 mm (2.102”)
宽度 79 mm (3.117”)
高度 27 mm (1.075”)
法兰盘长度 24 mm (0.936”)
孔中心 89 mm (3.500”)
孔的直径 5 mm (0.188”)
0729-1763-XX Dimensional Drawing
Red Supply (7 V DC to 30 V DC)
Black Supply (-)
Orange Zero wire
Green Relay (C)
Violet Relay (NO)
Blue Relay (NC)
Brown RS-232 receive (RX)
Yellow RS-232 transmit (TX)
width="250"

RS-232 Settings

Baud Rate 9600
Data Bits 8
Parity
Stop Bits 1

RS-232 Commands

‘?’ Show a list of all commands
‘set’ Enter setup mode
‘x’ Change x axis trip angle
‘y’ Change y axis trip angle
‘+’ Increment selected axis trip angle by 0.1°
‘-’ Decrement selected axis trip angle by 0.1°
‘S’ Save selected trip angles
‘Z’ Set and save a new zero position
‘d’ Change and save trip delay (0 to 9)
‘r’ Change and save return delay (0 to 9)
‘p’ Change and save relay polarity (0 to 9)
‘h’ Change and save hysteresis value (1 to 8)
‘f’ Change and save filter value (0 to 9)
‘q’ Show all settings
Esc Cancel the current command
RoHS Compliant
IP66 Environmental Protection
数量 价格
1 $154.80
10 $140.14
100 $130.43
500 $126.31
1000+ $114.18