0729-1763-XX ±45° RS-232/Relay Tilt Switch

0729-1763-99 Relay Tilt Switch
Download Datasheet

Discontinued: The direct replacement is our Fredericks Tilt Switches.

Part Number: 0729-1763-XX

Features and Benefits:

  • ±45° programmable trip points
  • Dual/two-axis measurement tilt switch
  • 4 simple to use relay outputs
  • Response time of ≤100 ms
  • Wide voltage supply range of 6.5 V DC to 40 V DC
  • Works with industry-standard 12 and 24 V DC vehicle batteries
  • Low current device drawing 30 mA at 12 V DC; low power consumption
  • D-sub 15 pin connector (DB15) for simple integration
  • Superior performance in extreme temperatures and environments
  • Excellent customer support

Our tilt switches (also referred to as a safety switch or tilt switch sensor module) are very similar to our inclinometers, but instead of a continuous output, tilt switches have a discrete on/off output from either a relay or an open collector. This tilt switch has 4 relay outputs which can be set to trip at specific angles in two axes, up to ±45° tilt. This tilt switch comes in a plastic housing that is environmentally sealed up to IP66, with a D-sub 15-pin (DB15) connector that can also be customized with almost any connector you specify. The trip angle can be set by us at the factory or set and reset by you in the field via the RS-232 communications.

The nature of the relay outputs makes this unit ideal for various tilt switch applications like construction vehicles and agricultural vehicles. More specific tilt switch applications include boom lifts, scissor lifts, and agricultural sprayers.

To learn more about the principles of tilt sensing and how to integrate tilt switch sensor modules into your application, see our Technical Information page.

Specifications

Communications RS-232
Supply Voltage 6.5 V DC to 40 V DC
Supply Current 30 mA @ 12 V DC
Operating Range ±10º (narrow angle)
±25º (mid-range)
±45º (wide angle)
Linear Range ±25º
Axes of Measurement 2
Repeatability ±0.005°
Resolution ≤0.1° (narrow angle)
≤18 arc seconds (mid-range)
≤0.1° (wide angle)
Null Offset ≤5°
Cross-Axis Sensitivity ≤0.025° per degree
Long Term Stability/Drift ≤0.1°
Null Temperature Offset 0.006° per °C
Range Temperature Offset 0.1% per °C
Relay Output Ratings 2A, 220 V DC
Materials Contains magnetic metals
Operating Temperature -40 °C to 70 °C
Storage Temperature -40 °C to 70 °C
Time Constant (63.2% of output) ≤100 ms
Housing ABS Plastic
Electrical Connections DB15 male connector
Weight 82 grams (without potting)
Length 79.76 mm (3.14”)
Width 53.34 mm (2.10”)
Height 27.31 mm (1.08”)
Hole Center 91.22 mm (3.59”)
0729-1763-XX Dimensional Drawing
Description Color Pin Number
Power Input Red 8
Common Red 1
Common Black 9
Common Black 15
Zero Wire Orange 7
Relay 1 (IN) White 2
Relay 1 (COM) Black 10
Relay 2 (IN) Green 3
Relay 2 (COM) Black 11
Relay 3 (IN) Yellow 4
Relay 3 (COM) Black 12
Relay 4 (IN) Blue 5
Relay 4 (COM) Black 13
 
Setup via RS-232 Link
RS-232 Input Black 14
RS-232 Output Brown 6

RS-232 Settings

Baud Rate 9600 (default, selectable up to 115200)
Data Bits 8
Parity None
Stop Bits 1

RS-232 Commands

‘x’ Output linear X value (0 to 65535)
‘y’ Output linear X value (0 to 65535)
‘c’ Output X value in degrees
‘d’ Output Y value in degrees
‘e’ Change and save trip delay
‘f’ Change and save return trip delay
‘h’ Change and save hysteresis value
‘g’ Change and save relay polarity
‘1’ to ‘4’ Set the selected axis trip point
‘n’ Save current position as zero
‘+’ Increase the filter value
‘-’ Decrease the filter value
RoHS Compliant
CE certified to CFR 47 FCC Part 15 Subpart B, EN 55011:2009/A1:2010, EN 61326-1:2006

Ordering Information

Description Part Number
Tilt Switch Plastic Housing Potted 0729-1763-01
Tilt Switch Plastic Housing Not Potted 0729-1763-03