Part Numbers: 2-2119-001, 2-2119-016, 2-2119-025, 2-2120-001, 2-2120-011, 2-2120-030, 2-2120-031, 2-2120-032, 2-2120-040, 2-2120-041, 2-2120-042, 2-2120-043, 2-2120-044, 2-2120-045, 2-2120-050, 2-2120-052
Compatible With: MX200, MX200 EthernetIP, MX4A
Merkmale und Vorteile:
- Kostengünstiges Pirani-Vakuum-Manometer
- Kompakter, robuster, verschmutzungsresistenter Vakuum-Messumformer
- Zahlreiche Anschlüsse verfügbar (1/8″ NPT, NW25, NW40, CF40, u.v.a.)
- Drop-in-Vakuum-Manometer-Ersatz
- Exzellenter Kundensupport für Vakuum-Messumformer
- Filter für stark kontaminierte Umgebungen verfügbar
The Televac® 4A convection gauge (also often called a Pirani or vacuum pressure gauge) is a fast, robust, contamination resistant, and high accuracy low vacuum pressure gauge due to the Pirani filament design. Note that by comparison to the 2A thermocouple vacuum gauge, the 4A Pirani vacuum gauge must be mounted vertically.
The 4A convection gauge will read from 1*10-3 Torr (1 micron) to 1000 Torr (1,000,000 microns, slightly above atmosphere) as opposed to the more limited range of the 2A with our vacuum controllers. It also has improved accuracy over the 2A, with several of our active gauges and controllers offering ±10% accuracy over the full operating range of the vacuum gauge. The 4A vacuum pressure gauge can be operated by several Televac® controllers, including the MX200, MX200 EthernetIP, and MX4A.
Vakuum-Messbereich | 1*10-3 (1 Mikron, 1 mTorr) bis 1000 Torr |
(für MX200, MM200, MC300, MP4AR) | 1*10-1 bis 1*105 Pa |
1*10-3 bis 1000 mbar | |
Vakuum-Messbereich(MX4A) | 1*10-4 (1 Mikron, 1 mTorr) bis 1000 Torr |
1*10-2 bis 1*105 Pa | |
1*10-4 bis 1000 mbar | |
Accuracy with MX4A, MX200 | |
1 to 10 mTorr (microns): | ±1 mTorr (±1 microns) |
10 mTorr (microns) to 1000 Torr: | ±10% vom Messwert |
Analog Output: | ±5 mV |
Accuracy with MM200, MC300, MP4AR | |
1 to 10 mTorr (microns): | ±1 mTorr (microns) |
10 mTorr (microns) to 1 Torr: | ±10% vom Messwert |
1 to 100 Torr: | ±20% vom Messwert |
100 to 1000 Torr: | ±10% vom Messwert |
Analog Output: | ±10 mV |
Maximale Filamenttemperatur | 250 °C |
Montageausrichtung | Vertikal |
Kalibriermedium | Trockene Luft oder Stickstoff (N2) |
Überdruck | 150 PSI |
Betriebstemperatur | 0 °C bis 50 °C |
Lagertemperatur | -40 °C bis 85 °C |
Maximale Ausheiztemperatur | 200 °C (Edelstahl) |
120 °C (Messing vernickelt) | |
Reaktionszeit | Controller-abhängig |
Eigenschaften des Analogausgangs | Controller-abhängig |
Auflösung des Analogausgangs | Controller-abhängig |
Vakuum-Verschraubungen | 1/8″ NPT, NW16, NW25, 1,33″ CF, 2,75″ CF |
Siehe Registerkarte Teilenummern oder Datenblatt für mehr | |
Elektrische Anschlüsse | Oktal-Steckverbinder |
Gewicht (NW25-Flansch) | 150 g (0.33 lbs) |
Höhe (NW25-Flansch) | 76 mm (3,0″) |
Höhe (NW25-Flansch) | 31,7 mm (1,25″) |
Zusätzliche Abmessungen | Siehe Datenblatt für Maßzeichnungen |
Eigenschaften des Analogausgangs

Wärmebehandlungs- und Vakuumöfen | |
Kryogenik und Industriegase | |
Dünnschichtabscheidung und Beschichtungsprozesse | |
Halbleiter | |
E-Strahl-Schweißen | |
Petrochemie | |
Lastverriegelung | |
Pharmazeutische Produktprozesse | |
Plasmabeschichtung/Sputtern | |
Kryo-Behälter/Tauwerk | |
Nachfüllen von Gasflaschen | |
Beleuchtung/Neonzeichen | |
Chemische Verarbeitung | |
Textil | |
Pharmazeutische Produkte | |
Verarbeitung Vakuumverpackung und Transport |